Last Updated On June 10th, 2020
If you work with wood and other materials as part of your profession or simply as a satisfying hobby, it is fair to say that you will be aware how important using the best table saw is to your end results. An unreliable or inaccurate table saw can make the difference between a beautiful piece of work and one which is a complete waste of your materials and time. And for craftsmen, there is nothing worse than seeing many hours of hard work totally ruined, simply because the table saw wasn’t up to the job.
With so many tools on the market, settling upon the best for your individual needs and budget can feel rather overwhelming. After all, a table saw isn’t a throwaway, disposable item. These tools are an investment which should last you for many years. Luckily for you, we are here to help guide you through some of the top ones on the market today.
Best Table Saws Compared
Top 7 Table Saw Reviews
Below, we examine 7 of the best table saw reviews in the UK which are suitable for everyone from DIYers to experienced professionals.
The Dewalt DW745 is a fantastic option for those who require a sturdy saw for professional use.
Packing an impressive 1850W motor, SERIES 30, 24-tooth saw blade and a built-in overload protection system, this table saw can stand up to any challenge you are likely to throw at it.
Weighing only 22 kg, it is light enough to be easily portable from one work site to another. Furthermore, the addition of a steel roll cage provides protection against unintended drops or topples.
This table saw offers a rip capacity of 61 cm, meaning it can effortlessly manage large pieces of wood or other materials. Accuracy is maintained thanks to the cast table top and supreme fence system, so you will no longer have to struggle with uneven edges.
Both the fence and the rack are provided with a front and rear lock, so you can be sure of optimal accuracy, even when working on large pieces. The supplied 24T carbide blade didn’t disappoint us, either. Its high-quality ensures that, even with heavy use, you can expect exceptional cutting quality as well as durability.
On the downside, some customers found the powerful motor to be quite loud, and also noted that the instruction manual was a little basic for new table saw users. A few people reported that the surface was easily chipped, but this is a minor issue which didn’t affect performance.
Should users experience any issues with it within 12 months of purchase, defective parts can be claimed under warranty completely free of charge.
The Vonhaus 1800W 10” is our top pick when it comes to value for money. Offering a top-quality, carbide tipped cutting blade, powerful motor and extendable table, this saw is a perfect option for DIYers and hobbyists.
It is extremely versatile. The 250 mm blade can cleanly cut a wide variety of common materials. MDF, hardwoods and softwoods are all easily managed with this saw, leaving a beautiful cut each time.
This table saw is capable of creating angled bevelled edge cuts, as well as longitudinal ones by allowing the adjustment of the blade head. A quick-clamp rip fence should ensure that the materials stay secured during operation, keeping the user safe while guaranteeing accuracy. Some users stated that the fence was a little flimsy, but not enough to render the unit unsafe.
When working with large materials, the table surface can be extended at each side as required. Therefore, if you regularly work on a range of projects, this should be multi-functional enough for your needs.
It also includes an effective dust-extraction port which limits the mess during cutting. This port can be easily attached to a dust bag or vacuum cleaner, making cleaning up after use quick and painless.
The Evolution RAGE5-S is our top pick for a home workshop. This impressive multifunctional table saw offers a formidable high torque motor, adjustable blade height and the ability to create super-accurate mitre and bevel cuts with the angled head.
Supplied with this is a multipurpose 255 mm bore, 28-tooth blade. Thanks to unique RAGE® technology, it is able to cut through aluminium, steel, wood and plastic without breaking a sweat.
Moreover, in contrast to other units, slicing through steel is effortless. No heat is created during cutting and the end result has a ready to use finish, completely cool to the touch and free from burr edges.
If your hobby or profession often requires angular cuts, this won’t let you down. It has a tilt capacity of 45 degrees, performing beautifully accurate bevel cuts every time.
Furthermore, the mitre gauge with sliding carriage features positive angle stops from between -60 and +60 degrees so you can be sure each of your pieces will fit together perfectly.
It is designed to accommodate materials in a wide variety of sizes. The right side of the table is fully extendable, allowing an additional 655mm rip cut capacity for those larger pieces. Dust is quickly and efficiently extracted during use via a 1.8 m collection hose.
Should you be looking for a table saw which is easy to transport, this is a good choice. The unit is easy to fold and has a wheeled frame for optimal portability. However, some users still found the unit quite heavy and noted that it doesn’t fit through a standard doorway without rotation.
The Evolution FURY5-S is another great machine from Evolution; suitable for both professionals and home craft hobbyists alike.
It offers a 1500 W hi-torque motor, as well as an impressive multi-purpose 255 mm carbide-tipped blade for ultimate strength and durability. It is able to effectively cut through steel, plastic, aluminium and wood. Steel that’s up to 3 mm thick can be tackled without creating heat or sparks. The resulting steel cuts are free from burrs and therefore have an immediately workable finish.
It can do more than simply cut through a range of materials. This machine also gives users generous cutting versatility, enabling easy-to-achieve cross, mitre, straight and bevel cuts for a range of requirements.
It has a maximum cut depth of 85 mm into wood and can be tilted up to 45 degrees to the left to achieve bevel cuts.
Just like the previous Evolution RAGE5-S saw, this also has a mitre gauge with sliding carriage which offers angle adjustments of between -60 and +60 degrees. The attached clamp has anti-vibration properties, but some users felt the carriage and clamp felt a little loose.
On the other hand, the rip fence is able to be firmly secured in any position. Thus, providing peace of mind that every cut will be accurate and your hands will be safe. However, it is recommended you use the included push stick as an additional safety measure to avoid injury. Also, its rip capacity is expandable by 410 mm to the right.
As is expected, this also includes a dust extraction port, which can be easily connected to a vacuum cleaner to reduce mess. Although, it should be noted that some people found the dust collection wasn’t all that effective.
The Proxxon Micromot FET is a sturdy, lightweight yet powerful option for detailed woodworkers.
Having a 10 mm, 24-tooth tungsten-tipped blade, this table saw is one of the best we have seen when it comes to fine adjustments and precise work. A set-screw allows the user to adjust the longitudinal stop by as little as 1/10 mm, perfect for meticulous work such as toy manufacture or mould construction. Although, some people found the fine adjustment mechanisms a little stiff.
The cutting depth is between 1 – 22 mm and it can also be tilted by 45 degrees to allow accurate angled cuts. Furthermore, if used in combination with the angle stop provided, it is possible to create double mitre cuts with little effort.
It is able to efficiently slice through a wide range of materials without trouble. Plastic, non-ferrous metals, wood, foam, and glass fibre are easily dealt with. All cuts are delivered smoothly without any need for refinishing. Saw blades sized between 50-85 mm can also be used with this machine if required.
Constructed from die-cast aluminium, this table saw weighs only 6 kg, but it is extremely stable. In fact, we think it is one of the best portable table saws available. The motor offers a low-noise drive; so you can work away without fear of disturbing the neighbours.
A dust extractor connection is included and works quite well. But, as the inner diameter is narrower than an average vacuum hose, it could be more efficient in design.
The Einhell TC-TS 2025/1 U is a great budget choice for both DIYers and professionals. Showcasing an incredible 1800W motor and 5000 RPM cutting speed, this makes short work of wood and fiberboard, as well as other materials.
The carbide tipped 254mm blade makes longitudinal cuts effortlessly and can be adjusted to any angle between 0 and 45 degrees as required. Furthermore, the mitre gauge enables the user to easily make bevel crosscuts between -60 and +60 degrees, although customers said it sometimes felt a bit unstable. Both the angle and the height of the blade can be independently adjusted for ultimate cutting flexibility.
Should you need to work with particularly large pieces, it can be expanded on three sides to a maximum of 220 mm, thus allowing plenty of space to deal with panel boards or wide sheets as necessary.
Even at such an affordable cost, this cheap table saw has a base frame that offers a convenient working height, but it also feels sturdy and secure when presented with heavier materials.
A dust extraction port is included, as is a push stick with a dedicated holder, so it is always close by when needed.
Utilizing a 2000W motor with a 5000 rpm cutting speed, the ParkerBrand PTS-250 is a powerful choice capable of benefiting all users.
This table saw uses a 24-tooth, carbide-tipped 254 mm blade, which makes clean cuts easily and quickly. The impressive 5000 RPM cutting speed is one of the fastest we have seen. Each cut is smooth and requires little-to-no refinishing.
Whilst the blade doesn’t tilt to allow bevel cuts like others we have reviewed, this does have a mitre gauge which allows for easy angled cuts. Once the gauge is secured in the correct position, it can create cuts across an angle range of -60 to +60 degrees. The height of the blade is easy to control using the hand wheel beneath the table.
With regard to the size, it can be extended to a total size of 64.2 mm x 938 mm which should be more than large enough for the majority of users’ needs. The aluminium rip fence is also adjustable and reaches around ¾ of the total table length. On the other hand, the stand is non-folding so this table saw isn’t as easy to store away as other models.
In terms of safety, it has a number of features to help avoid injury. A sturdy blade guard is included, as is an easy-to-reach on/off switch. Also, a riving knife is installed to prevent potentially dangerous kickbacks.
Different Types of Table Saw
The name “table saw” actually encompasses a number of different types of table saws. Below, we look at some of the most common ones.
Benchtop Table Saw
Benchtop table saws are the most popular entry-level table saws on the market. As the name suggests, they are designed so that they can be used on any flat benchtop or table which is sturdy enough to support them. They can be used with a stand, but these have to be purchased separately. These are lightweight and very portable.
Cabinet saws are the most powerful, largest and heaviest table saws. These tend to be used by trade professionals, but may be used by dedicated hobbyists and DIYers too.
These have a highly durable table top and are usually extendable from one, or both sides, to allow for larger materials. They are designed to be long-lasting and can withstand regular heavy use. As a result, these are not considered to be portable.
Contractor saws are heavier and more powerful than benchtop saws, but they are still a portable option. These saws have an attached stand which is often wheeled to enable easy movement from one site to another.
They also tend to be compatible with many different components, so users’ have more freedom to customise the machine with readily available parts.
Things To Look For When Buying A Table Saw
Now, we have seen the different types of table saw available. Whether you plan on making a DIY sofa bed or doing a home renovation, there are some things you should always look for when choosing a table saw.
It’s little surprise that the blade is perhaps the most important consideration to take into account when choosing a table saw. After all, this is the component which will be doing all the work.
Most table saws will come with carbide or tungsten tipped or coated blades. This increases the strength and durability of the blade and increases the quality of the cut.
Some blades are more suited for cutting wood rather than steel, while others are multi-functional and capable of cutting many different materials to a high standard. The best blade for you really depends on what you are planning to use your table saw for.
If you are only planning to use it for woodwork, a wood blade will suffice. On the other hand, if you are using it for trade and will be encountering many different materials, you should go for a blade which is able to effectively handle them all. It is usually possible to change the blade to suit the material being cut, but this can become quite a hassle if you have to do it often.
Furthermore, the versatility of the blade head is crucial if you wish to make angled cuts. Most table saws will have a blade head which can tilt in one direction to allow bevel cuts, but some more basic models may not.
The fence is a metal barrier which lies parallel to the edge of the saw table and blade. Its purpose is to behave as a fixed resistance point for straight cuts, against which you place the edge of the material to be cut.
The fence can usually be adjusted by sliding it along a measuring gauge on the edge of the table top so that you can set the width of the piece you need to cut. They can also often be removed completely if necessary.
Just like the fence helps the user to create a straight cut, the mitre gauge allows the user to more easily and safely make angled or cross cuts into the material.
This component is settled into a track on the tabletop, within which it is able to slide up and down parallel to the blade. It consists of a measuring guide and a lockable, rotatable, half-moon shaped section which the material is rested against for cutting. A mitre gauge can usually pivot as far as 45 degrees to the left and right.
The available degree of rotation will be important if you are going to be using the saw for a variety of cross cuts.
Last, but by no means least, are the safety features. If you value your digits, which you should, then you will want to be keeping them attached to you. Table saws are dangerous tools and we should take precaution to prevent injuries.
Make sure that the table saw you purchase at least has an easy-to-reach off switch, a blade guard and a push stick. If possible, choose a model which also incorporates some protection against kickbacks too, such as a ‘riving knife’.
All of the table saws in our review would be good tools for hobbyists and professionals of varying levels of experience, but the Dewalt DW745 is our overall winner.
We were very impressed by the powerful 1850W motor, which combined with the 24T carbide blade, offers a high-quality cut every time.
It also features a generous capacity of 61 cm, which is perfect when dealing with larger materials. However, even with such a large capacity, this table saw doesn’t compromise on precision.
The cleverly designed fence and rack have both a front and rear lock, to ensure you never have to worry about rough, uneven edges again. Furthermore, accurate bevel cuts are quick and effortless to achieve, thanks to the easy to use bevel lock.
To really seal the deal, it features an overload protection system and steel roll cage which defends against unexpected damage.
Overall, we think the Dewalt DW745 is the best table saw for the money we have seen.